Eaton Network-MS User Manual Download Page 13

Page: 13 / 143

www.eaton.com

Network
Management Card
(Network-MS)

User Manual

Network Management Card

– User Manual

34003991XT_EN/JC

Page

13/143

1.3.4 Administration

•

NEW features:

External User Authentication from RADIUS or LDAP

•

Up to 35 workstations (in TCP connected mode) or up to 100(in UDP broadcasted mode) protected by

Intelligent Power Protector.

•

Up to 5 browsers connected at the same time (3 in SSL).

•

Minimum recommended browser versions: Internet Explorer 8, Mozilla Firefox 3.6, Chrome.

•

E-mail sending configurable according to UPS alarms and transmission of a periodical report.

•

Control of UPS on/off switching via the HTML interface.

•

Adjustment and control of PowerShare outlets via the HTML interface, sequential starting of the

installation and optimisation of backup time by shutting down non-priority systems.

•

Automatic data and time adjustment via NTP server.

•

Protection by encrypted password.

•

Protection by secure SSL connection.

•

Backup logs in the non-volatile memory.

•

Languages available: English / French/ Spanish / German / Italian / Chinese Traditional / Chinese

Simplified / Japanese / Portuguese / Russian / Korean / Czech.

•

On-line help in English available for each page.

•

Card firmware update via the network.

•

Card Mass settings via the network with Intelligent Power Manager.

•

Firmware Mass Upgrade via the network with Intelligent Power Manager.

•

Ability to change the SMTP, SNMP and TRAP ports.

1.3.5 Network

Fast ETHERNET 10/100 Mbits compatibility with auto-negotiation on the RJ45 outlet.

Compatible with 1Gbits networks in 100 Mbits mode

1.3.5.1 List of ports used

Protocol

Direction

Type

Port Number

SSH

TCP

TELNET

TCP

SMTP

out

TCP

25*

HTML

out

TCP

NTP

in/out

UDP

68, 67

BootP, DHCP

in/out

UDP

68, 67

SNMP V1 & V3

in/out

UDP

161*

TRAP SNMP

in/out

UDP

162*

SSL

out

TCP

443

Summary of Contents for Network-MS
















































































































































Search results

Summary of Contents for Network-MS

Reviews:

Related manuals for Network-MS

Brands by name

Popular brands

Eaton Network-MS, User Manual

Search results

Summary of Contents for Network-MS

Reviews:

Related manuals for Network-MS

Brands by name

Popular brands