www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card
– User Manual
34003991XT_EN/JC
Page
101/143
not allowed in command arguments except for the strings. The strings are in double quotes (“”).
The code colour is the following:
•
Setting in read-write or write-only mode: light green
•
Setting in read-only mode: yellow
•
Warning message: green
•
Error message: light red
The recognized commands are given in the following chapters and may be updated later.
6.4.1 Generic command
6.4.1.1 “help” and “?”
Purpose
Display help about a specific command.
Syntax
help [command] or [command] ?
Examples
#> help getNetwork
#> getNetwork ?
6.4.1.2 “setEcho”
Purpose
Hide, or not, all characters. If hidden, each character entered is replaced by an ‘*’
Syntax
setEcho [option]
option :
ON
OFF
Examples
#> setEcho ON
6.4.1.3 “quit”
Purpose
Close a current CLI session
Syntax
quit
Examples
#> quit
6.4.1.4 “reset”
Purpose
Software reset
Syntax
reset
Examples
#> reset
6.4.1.5 “version”
Purpose
Get information about software versions
Syntax
version
Examples
#> version
