www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card
– User Manual
34003991XT_EN/JC
Page
14/143
IPP in connected mode
in/out
TCP
5000
IPP in UDP broadcast mode
in/out
UDP
4679, 4680R
RADIUS
out
UDP
1812*
LDAP
out
TCP
389*
* These ports can be changed by the user, the values shown are the defaults defined by the standards.
1.3.6 Environment sensor
•
Temperature measurement from 0 to 70 °C with +/- 1 °C accuracy.
•
Measurement of humidity from 0 to 100 % with +/- 6 % accuracy.
•
Min / max time-stamped function for temperature and humidity.
•
Choice of temperature readings in Celsius or Fahrenheit.
•
High and low thresholds, hysteresis and offset adjustable via Web interface.
•
Possibility of notification of status changes by e-mail, SMS or SNMP trap.
SMS notification requires the use of a third-party application that converts emails to SMS.
•
Position detection of 2 dry contacts (maximum sensor/contact distance: 20 m).
•
Name and status of each configurable contact.
•
Recording of events and measurements in the card log
•
Possibility of shutting down the installation in the event of a threshold being exceeded or on opening /
closure of a dry contact
•
Connection to the card with straight shielded CAT5 RJ45 network cables (maximum card/sensor
distance: 10 m)
1.3.7 MIB (Management Information Base)
•
The card is Compatible with following MIBs:
•
MIB II (RFC 1213)
•
Internet Engineering Task Force (IETF) Standard UPS MIB (RFC 1628)
•
EATON Pulsar MIB (ex MGE) V1.7
•
EATON Powerware MIB (PowerMib)
•
•
See the
appendix
Chapter
