www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card
– User Manual
34003991XT_EN/JC
Page
87/143
•
Port
•
Time Out
6.2.9 SNMP settings
These settings configure the 2 SNMP versions available, v1 and v3.
The parameter list is the following:
•
Version
•
SNMP port
•
SNMP v1 community Read-Only
•
SNMP v1 write enables
•
SNMP v1 community write
•
SNMP v3 user Read-Only
•
SNMP v3 security Read-Only
•
SNMP v3 password Read-Only
•
SNMP v3 user Read-Write
•
SNMP v3 security Read- Write
•
SNMP v3 password Read- Write
•
Notification user name
6.2.10 Date and time
These settings enable the initialisation of the date and time of the card in three different ways.
The parameter list is the following:
•
Date & Time
•
Type of synchronisation
•
NTP host name
•
Time-Zone
•
Daylight saving time
6.2.11 Environment settings
These settings enable the configuration of the environment sensor. If not present, this menu is not available.
The parameter list is the following:
•
Sensor name
•
Temperature:
•
Unity
•
High threshold
•
Low threshold
•
Hysteresis
•
Offset
•
High notify
