44
GREEN MOTION BUILDING INSTALLATION MANUAL
MN191028EN January 2022 www.eaton.com
00 Title
10.3 Uninstall
Before starting any maintenance operations, ensure that the system has been switched off, and that the
AC-line external main switch has been set to off.
Wait at least 10 minutes before removing the Green Motion Building EV charger.
The enclosure could overheat during its operation, or be heated by direct sunlight, and it can cause burns on
contact. To avoid burns from an overheated surface caused by sunlight, please use suitable PPE or wait for
the equipment to cool down before accessing it.
To uninstall the unit:
Step 1 .
Disconnect any load.
Step 2 .
Open the housing by removing the fixing screws.
Step 3 .
Disconnect the AC grid connectors.
Step 4 .
Disconnect the communication wires and external controls where present.
Step 5 .
The product can now be removed for disposal or repair.
10.4 EV charger updates
It is mandatory to install and maintain units with the latest system update to enable new features and bug
fixing, or the product guarantee may be voided. Please contact your Eaton technical support representative
using the email address
10.5 Disposal
The EU Directive on Waste Electrical and Electronic Equipment (WEEE) (Directive 2012/19/EU) establishes
common rules on the management of electrical and electronic equipment to minimize its impact – from
design until disposal – on the environment. As a manufacturer of electrical and electronic equipment, Eaton
actively supports the requirements of the WEEE Directive.
In compliance with the EU standard EN 50419 for marking of electrical and electronic equipment, we include
the crossed-out wheeled bin symbol on our products. This symbol alerts users that these products should
be recycled in accordance with local environmental regulations and not discarded with household waste.
When end users recycle WEEE they are helping to ensure that these products are neither incinerated nor
sent to landfill, minimizing the potential negative impact on human health and the environment.
Any device that is no longer needed must therefore be returned to the distributor or disposed to an
authorized collection point or recycling center in the area. Eaton encourages all its customers and end users
to make responsible decisions when it comes to disposing products.
Eaton is not responsible for the transportation of the device to the collection point or recycling center.
When disposing of the EV charger, the end user should contact professional and qualified personnel for disposal
instructions. Please refer to
www.eaton.com
for further details.
