74
Technical Data
PR202-50-502-22
Effective June 2017
CF2000 System
EATON
www.eaton.com
Spur Isolator CSI350
To install the device
1.
Fit the unit in position .
2.
Connect the unit according to the diagram below .
otes:
N
1.
A Spur Isolator must be used when making spurs from the
analogue addressable panel loop . Without this unit, the self
addressing features of the system will not function correctly .
2.
No addressing of the interface is required . See control panel
operation for details .
The standard connections are shown in Figure 53 .
Figure 53. Spur Isolator CSI350
otes:
N
1.
Only connect cable screen to its adjacent earth terminal .
2.
For maximum spur length / load see BS5839 Part1:2002 .
3.
This unit can only be used with Eaton CAB300 detector bases
and compatible sensors .
