77
Technical Data
PR202-50-502-22
Effective June 2017
CF2000 System
EATON
www.eaton.com
Micro Input Module Wiring MCIM
To install the device
1.
Fit the box in position using the mounting details below .
2.
Connect the unit according to the diagram in Figure 56 .
3.
Recommended Cable Type: FIRETUF, FP200, MICC .
ote:
N
No addressing of the interface is required . See control panel
operation for details . There are no serviceable parts so no
maintenance procedures apply .
Figure 56. Standard connections MCIM
1.
Only connect cable screen to its adjacent earth terminal .
2.
The end of line resistor provided must always be fitted, even if
the input is unused .
3.
Monitored inputs can detect open or short circuit faults .
