75
Technical Data
PR202-50-502-22
Effective June 2017
CF2000 System
EATON
www.eaton.com
4 Way Sounder Controller CSC354CPR
To install the device
1.
Remove the cover of the unit .
2.
Fit the back-plate in position and pass the wires into it taking
care not to damage the circuit board .
3.
Connect the unit according to the diagram below .
ote:
N
No addressing of the interface is required . See control panel opera-
tion for details . This unit requires a permanent 230V AC supply .
The standard connections are shown in Figure 54 .
Figure 54. 4 Way Sounder Controller CSC354CPR
otes:
N
1.
Only connect cable screen to its adjacent earth terminal .
2.
The end of line resistors must always be fitted, even if the
sounder circuits are unused
