70
Technical Data
PR202-50-502-22
Effective June 2017
CF2000 System
EATON
www.eaton.com
1 Channel Mains Rated I/O
Wiring CMIO353
To install the device
1.
Separate the two halves of the unit .
2.
Drill out (or knock out) the required cable entries in the surface
mounting backbox .
3.
Fit the back-box in position and pass the wires into it .
4.
Connect the unit according the diagram in Figure 49 .
ote:
N
No addressing of the interface is required . See control panel
operation for details .
Figure 49. 1 Way Input Output Unit CMIO353
otes:
N
:
1.
Only connect cable screen to its adjacent earth terminal .
2.
The end of line resistor must always be fitted, even if the spur
is unused .
