88
8 Operating
Mounting and Operating Instructions CEAG Central Battery System ZB-S 40071860179 (L) November 2018 www.ceag.de
8.4.4 Menu 4: “DLS/TLS setup”
Menu 4.1:
<ok>
<ok>: The search result is accepted; the
parameters will be used by the CU CG-S for
the controller
<Menu>: The search result is rejected – the
old settings are retained
When all possible addresses have been
polled the procedure is closed and the sys-
tem returns to menu 4 “DLS/TLS Setup”
with the new para meters.
Finish and return to Menu 4 with
<Menu>
The procedure is necessary, for example when the system is first
commissioned or after adding/removing DLS or TLS mo-dules.
All addresses are searched in succession for installed DLS and TLS
modules.
The icon bar
indicates how the search is progressing.
Menu 4.2:
<ok>
Line selection (line 2, 4) with
Select a bus address with
The message “DLS/TLS Text” appears on line 4
as a default setting or, if already defined, a mod-
ule name
Editing DLS/TLS Text:
–
Select line 4 with
–
Select the input point with
–
All the possible alphanumeric characters are
displayed cyclically with the cursor keys
.
–
Once a name has been fully entered, con-
firm the entry with <ok>. The remaining
characters after the current cursor position
are cleared.
Finish and return to Menu 4 with <Menu>
Find address:
n
O
Search result
Find address:
n
O
Search result
DLS+3Phase monit.
Menu=No OK=YES
If no external bus module is found, you will
see the message
Search result
not installed
If a bus module has been identified, you will
see the message ...
Search result
DLS+3Phase monit.
Search result
DLS module external
Search result
TLS module external
Search DLS/TLS ...
Text assignment
TLS times
3-PhW-Combinations
Text assignments
DLS+3Phase monit. N
o
DLS/TLS Text
Search DLS/TLS ...
Text assignment
TLS times
3-PhW-Combinations
Notes:
You can use this menu to view assignments with external modules and
assign/edit module names without changing the configuration.
These module names are stored on the memory card and displayed in
the LCD display menus as operator help. Text assignments cannot be
made with the CU CG-S if a memory card is not inserted!
A more user-friendly input is possible using a CEAG configuration
software for the ZB-S system with a PC (data are transmitted by the
memory card).
Overview:
Main menu
Test & status menu
Block & reset alarms
Basic settings
DLS/TLS Setup
Circuit setup
Luminaire setup
Logbooksetup
Send ServicePinMsg
Menu 4
Search DLS/TLS ...
Text assignment
TLS times
Selection of
menu options
with the keys
<ok>:
confirm selec-
tion
<Menu>: can-
cel and return
to the previous
menu (any
changes en-
tered are saved)
<ESC>: cancel
and return to
the previous
menu (any
changes en-
tered are not
saved)
flashing input
prompt
Line selection (line 1, 2) with
Make changes in the input field with
When this menu option is selected the system dis-
plays the first TLS module number it finds; in the
“Port” input field you can now select from among the
possible ports of the modules with
In line 2 the stairwell light operation times 1 sec, 1 ...
15 min can be selected with
Line 3 shows the module name (s. menu 4.2).
Finish and return to Menu 4 with <Menu>
Menu 4.3:
<ok>
Search DLS/TLS ...
Text assignment
TLS times
3-PhW-Combinations
TLS:N
o
Port:N
o
Time 1 min
DLS/TLS Text
After the search of the 3PhW and activate of the option
of selective emergncy lighting, at DLS/TLS-Setup appear
the menu option „3-Phase monitoring combination.“
In the first row of this menu the current Phase moni-
toring can be choosed which logic connected with other
Phase monitorings if other 3-Phase monitorings report
a mains failure.
From the second row appear a list of 3-Phase monitoring
which can logic connected with the Phase monitoring
of the first row.
By pushing the <ok> push button the favored Phase
monitoring will connected.
The connection is shown by the * sign.
Menü 4.4:
<ok>
Search DLS/TLS ...
Text assignment
TLS times
3-PhW-Combinations
3-Phase monitoring 12<>
3-Phase monitoring 1 *
3-Phase monitoring 2
3-Phase monitoring 3
3-Phase monitoring 4
3-Phase monitoring 5
3-Phase monitoring 6
3-Phase monitoring 7
