Configuration Using the PROFIBUS Configuration File
C441 PROFIBUS Module User Manual
MN042002EN—July 2015
www.eaton.com
21
S811+ Soft Starter
Table 20. S811+ Soft Starter Configuration File
Parameter Name
Location
Notes
Enable Device Parameterization
Adapter
0 = Ignore user data
1 = Download Device Parameters
Com Adapter Outputs Com Loss Behavior
Adapter
0 = Fail Safe (outputs disabled)
1 = Hold Last State
Overload Trip FLA Value scaled in 0.1A
S811+
110–20,000 range
Overload Trip Class Value
S811+
Class 5–30
Motor Rated Volts
S811+
115–600 V (Motor nameplate voltage)
Motor Line Frequency Rating
S811+
50.00–60.00 Hz (in 0.01 Hz)
Motor Wiring Configuration
S811+
0 = Inline Wiring
1 = Inside Delta
Motor Phase Sequence
S811+
0 = ABC Phase sequence
1 = ACB Phase sequence
Motor Start Method
S811+
0 = Voltage Ramp
1 = Current Limit
2 = Unavailable
3 = Pump Start (w pump option)
Percent Initial Torque
S811+
0–100%
Motor Start Ramp Time
S811+
0.5–180 s (in 0.1 sec)
Motor Stop Ramp Time
S811+
0.0–60.0 s (in 0.1 sec)
Motor Pump Stop Time
S811+
20.0–120.0 (in 0.1 sec)
Kick Start Initial Torque
S811+
0–100%
Kick Start Time
S811+
0.0–2.0 sec (in 0.1 sec)
Ramp2 Motor Phase Sequence
S811+
0 = ABC Phase sequence
1 = ACB Phase sequence
Ramp2 Motor Start Method
S811+
0 = Voltage Ramp
1 = Current Limit
2 = Unavailable
3 = Pump Start (w pump option)
Ramp2 Motor Percent Initial Torque
S811+
0–100%
Ramp2 Motor Start Ramp Time
S811+
0.5–180 s (in 0.1 sec)
Ramp2 Motor Stop Ramp Time
S811+
0.0–60.0 s (in 0.1 sec)
Ramp2 Motor Pump Stop Time
S811+
20.0–120.0 (in 0.1 sec)
Ramp2 Motor Kick Start Initial Torque
S811+
0–100%
Ramp2 Motor Kick Start Time
S811+
0.0–2.0 sec (in 0.1 sec)
Motor Control Terminal Block Local Control Enable
S811+
1 = local control only enabled
0 = disable (terminal block input selects local/network control)
