PROFIBUS I/O Parameters
32
C441 PROFIBUS Module User Manual
MN042002EN—July 2015
www.eaton.com
S811+ Soft Starter
Table 25. S811+ Available IO Data for Cyclic Polling
IO
Size (in bytes)
Tag
Description
N/A
0
S811 Soft Starter Base
Base Module for the CS811 Soft Starter.
Note
: Base module must be loaded into slot 1 of the configuration.
This MUST be the first module listed in the configuration.
Output
1
Com Adapter Outputs
0x01 = Turn on Relay1
0x02 = Turn on Relay2
Input
1
Com Adapter Inputs
0x01 = I0 enabled
0x02 = I1 enabled
0x04 = I2 enabled
0x08 = I3 enabled
Input
1
COM Adapter Status
0x0001 = Adapter Connected
0x0002 = Message Error
0x0004 = Adapter Married
Input
1
MOTOR CONTROL STATUS
0 = Running1
1 = Running2
2 = Permissive
3 = Ramp2
4 = LocalControlStatus
5 = Faulted
6 = Warning
7 = In bypass
Input
6
Active Faults & Warning List
Latest 3 Fault/Warning codes
Input
2
Motor Control Faults
Bit Fault
0 = Phaseloss
1 = Phase Imbalance
2 = Thermal Pile
3 = Overcurrent
4 = Breaker Fault
5 = GND Fault
6 = Motor Stall
7 = Motor Jam
8 = OverTemp
9 = UnderLoad
10 = Reserved
11 = Estop
12 = Reserved
13 = Reserved
14 = Reserved
15 = Other
Input
2
Motor Control Warnings
Bit Warning
0 = Phaseloss
1 = Phase Imbalance
2 = Thermal Pile
3 = Overcurrent
4 = Breaker Fault
5 = GND Fault
6 = Motor Stall
7 = Motor Jam
8 = OverTemp
9 = UnderLoad
10 = Overload Impending Trip
11 = Reserved
12 = Reserved
13 = Reserved
14 = Reserved
15 = Other
