Configuration Using the PROFIBUS Configuration File
18
C441 PROFIBUS Module User Manual
MN042002EN—July 2015
www.eaton.com
C440 Overload Protection Relay
Enable MI AuxRly PhLoss Trip Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly Jam Trip Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly LowKW Trip Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly HighKW Trip Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly HighV Trip Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly LowV Trip Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly PhRev Trip Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly Overload Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
Enable MI AuxRly Freq Fault Indication
Motor Insight
1 = Indication Enabled; 0 = No Indication (CP models only)
MI AuxRly Reset Delay
Motor Insight
0 = 500 (minutes) (CP models only)
MI-CP-HVR Wire Config
Motor Insight
Three-phase, single-phase V and I or
Three-phase current only (CP models only)
MI-CP-HVR Overload on Start
Motor Insight
Enable/Disable (CP models only)
MI-CP-HVR GF on Start
Motor Insight
Enable/Disable (CP models only)
MI-CP-HVR Anti-back spin Time
Motor Insight
0–3600 seconds (CP models only)
MI-CP-HVR PT Ratio
Motor Insight
0–8000 (CP models only)
Table 17. C441 Motor Insight Configuration File, continued
Parameter Name
Location
Notes
Table 18. C440 Overload Supported Configuration File
Parameter Name
Location
Notes
Enable Device Parameterization
Adapter
0 = Ignore user data
1 = Download Device Parameters
Com Adapter Outputs Com Loss Behavior Adapter
0 = Fail Safe (Off)
1 = Hold Last State
C440 Com Loss Behavior
C440
Fault/Hold Last State