Configuration Using the PROFIBUS Configuration File
16
C441 PROFIBUS Module User Manual
MN042002EN—July 2015
www.eaton.com
C441 Motor Insight Overload Protection Relay
Table 17. C441 Motor Insight Configuration File
Parameter Name
Location
Notes
Enable Device Parameterization
Adapter
0 = Ignore user data,
1 = Download Device Parameters
Com Adapter Outputs ComLoss Behavior
Adapter
0 = Fail Safe (outputs disabled),
1 = Hold Last state
CT Multiplier
Motor Insight
Cat No C441BB, C441CB, C441DB
1-4
Cat No C441BA, C441CA, C441DA
1, 2, 3 (150:5), 4 (300:5), 5 (600:5)
Overload FLA
Motor Insight
Setting is in Amps x 100
Cat No C441BB, C441CB, C441DB
5–22.5 Amps (CT Multiplier = 4)
6.67–30 Amps (CT Multiplier = 3)
10–45 Amps (CT Multiplier = 2)
20–90 Amps (CT Multiplier =1)
Cat No C441BA, C441CA, C441DA
1–5 Amps (CT Multiplier = 2)
2–9 Amps (CT Multiplier = 1)
60–135 Amps (CT Multiplier = 3)
120–270 Amps (CT Multiplier = 4)
240–540 Amps (CT Multiplier = 5)
Overload Trip Class
Motor Insight
5–30
Overload Reset Mode
Motor Insight
0 = manual reset mode—default
1 = Apply Motor Fault Reset Delay and Motor Faults Number of Restarts
Over Voltage Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Under Voltage Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Phase Order Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
GND Fault Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Voltage Unbalance Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Current Unbalance Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Under Current Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Phase Loss Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Jam Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
Low kW Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
High kW Trip Enable
Motor Insight
1 = Trip Enabled; 0 = Warning only
GND Fault Trip Level
Motor Insight
Setting in Amps x 100
Cat No C441BB, C441CB, C441DB
3–20 A (CT Multiplier = 1)
1.5–10 (CT Multiplier = 2)
1–6.66 (CT Multiplier = 3)
0.75–5 (CT Multiplier = 4)
Default setting is 10 A
Cat No C441BA, C441CA, C441DA
0.3–2.0 A (CT Multiplier = 1)
0.15–1.0 (CT Multiplier = 2)
9–60 (CT Multiplier = 3)
18–120 (CT Multiplier = 4)
36–240 (CT Multiplier = 5)
Default setting is 1 A
GND Fault Trip Delay
Motor Insight
1–60 seconds (30) default
