Eaton ARCON 2.0 Series, Operation And Configuration Instructions. Technical Description

Page: 60 / 85

60
8.2. Tests and environmental conditions
Disturbance tests
Test Standard & Test class / level Test value
Emission EN 61000-6-4
- Conducted EN 55011, class A 0.01 - 30 MHz
- Emitted EN 55011, class A 30 - 1 000 MHz
Immunity EN 61000-6-2 / IEC 60255-26
- 1MHz damped IEC 60255-22-1 ±2.5kVp CM, ±1kVp DM
oscillatory wave
- Static EN 61000-4-2 class IV / 8 kV contact, 15 kV air
discharge (ESD) IEC 60255-22-2
- Fast transients EN 61000-4-4 class IV / ±4 kV, 5/50 ns, 5 kHz
(EFT) IEC 60255-22-4 class A
- Surge EN 61000-4-5 class III / 2 kV, 1.2/50
μ
s, CM
IEC 60255-22-5
1 kV, 1.2/50
μ
s, DM
- Conducted EN 61000-4-6 class III / 0.15 - 80 MHz, 10 Vemf
HF fi eld IEC 60255-22-6
- Emitted EN 61000-4-3 class III / 80 - 2700 MHz, 10 V/m
HF fi eld IEC 60255-22-3
- Voltage EN 61000-4-29 / 30%/1s, 60%/0.1s, 100%/0.05s
interruptions IEC 60255-11
- Voltage EN 61000-4-17 / IEC 60255-11 12% of operating voltage (DC) / 10min
alternative
component
- Voltage dips EN 61000-4-11 30%/10ms, 100%/10ms
and short 60%/100ms
interruptions >95%/5000ms
- Power- EN 61000-4-8 300A/m (continuous), 1000A/m / 1-3s
frequency
magnetic fi eld
- Pulse EN 61000-4-9 1000A/m, 1.2/50
μ
s
magnetic fi eld
8.2.1. Electrical safety tests
Test Standard & Test class / level Test value
- Impulse voltage EN 60255-5, class III 5 kV, 1.2/50
μ
s, 0.5 J
withstand
- Dielectric test EN 60255-5, class III 2 kV, 50 Hz
- Insulation EN 60255-5
resistance
- Protective EN 60255-27
bonding
resistance
- Power supply IEC 60255-1
burden