Eaton 93E UPS 15-80 kVA (380/400/415 V)
Installation and Operation Manual
© Eaton Corporation plc 2015. All rights reserved.
Revision: 001
Document ID: 614-01975-00
97 (133)
Figure 41.Typical initial setup screen
7.2.7
System controls
To display the Controls screen, select the CONTROLS symbol in the
main menu bar and press the
push button. Use the Controls screen
to control the normal operation, transfer to bypass, load off, and charger
control commands. In addition, the screen displays the current status of
the UPS. Figure 42 shows the System Control screen.
Use the
or
push button to highlight the desired command screen,
then press the
push button to display the command menu screen.
Use the or push button to highlight the desired command.
Table 16 describes the control functions and provides instructions on
how to access and use the command menu screens.
Table 17 lists typical system status screen messages that are displayed
during the UPS operation.
Figure 42.Typical system control screen