East Tester ET3501, Operating Instructions Manual

Page: 85 / 111

ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd. 82
Comparator
9 groups of qualified setting, one group of unqualified setting, one group of
auxiliary setting
Triggered mode Internal,External,manual, bus
Mathematical operations Delta（absolute value），Delta%（percentage） ，Direct reading
Calibration function
Self-calibration, open circuit,short circuit,load,100 groups of customised
frequency point
List scanning 10-point list scanning testing
Storage device Internal/USB storage device
Interface
GPIB、LAN、RS232、USB Host、USB Device、Handler
6.1.1 Measurement function
ET35 series digital electrical bridge supports the following measurement functions
：
Cp-D, Cp-Q, Cp-G, Cp-Rp,
Cs-D, Cs-Q, Cs-Rs,
Lp-D, Lp-Q, Lp-G, Lp-Rp,
Ls-D, Ls-Q, Ls-Rs,
Rs-Xs,
|Z|-θr, |Z|-θd,
|Y|-θr, |Y|-θd,
G-B.
6.1.2 Test signal
（
1
）
Test frequency
Test
frequency
10Hz-1MHz(ET3510)
10Hz-500kHz(ET3505)
10Hz-300kHz(ET3503)
10Hz-200kHz(ET3502)
10Hz-100kHz(ET3501)
Resolution 1mHz
Accuracy 0.01%
（
2
）
Test level
Voltage
Rated value
Range 10mVrms~2Vrms
Resolution 1mVrms