ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd.
55
The page is shown below
Set the mode
3.4.2 List Sweep Parameters
The sweep parameters in List sweep can be the frequency, signal level and DC bias.
The steps of setting the List sweep parameters:
1. Press the [Meas Setup] key.
2. Press the [List sweep] function key.
3. Use the arrow key to select the sweep parameters, and press the [Enter] key.
4. Use the function key to select the sweep parameters the users needs.
Function keys:
Frequency [Hz] use the frequency as the List sweep parameter
Level [V] use the voltage as the List sweep parameter
Level [I] use the current as the List sweep parameter
Bias [V] use the voltage of DC bias as the List sweep parameter
Bias [I] use the current of DC bias as the List sweep parameter
Summary of Contents for ET3501
Page 25: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 22...
Page 77: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 74...
Page 93: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 90...
