East Tester ET3501, Operating Instructions Manual

Page: 12 / 111

ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd. 9
Steps of setting the function of measurement:
1. Press the [Display Format] key.
2. Press the [Measurement Display] key.
3. Use the arrow key to select the relevant parameter field such as "function" (part of
the common parameters can be set by selecting the corresponding function shortcut
key).
4. Use the function key to select the required parameter. (for the option requiring
number input, input the number and select with the function key).
(2) BIN Number Display
When you press the [Display Format] key and the [BIN Number Display] function key,
the page of BIN Number display will be shown. BIN classification is shown in large
character, and the measurement is shown in normal character. Users can set the
measurement control on the page
Comparator function on / off
The following information is also shown in the monitoring area on the page. These
conditions can be set on the measurement setting and correction setting page, and most
of the conditions can be set on the component measurement page.

function

bias

range

frequency

offset

trigger

level

speed

correction