ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd.
19
3.1.5 Measruement frequency
The measurement frequency of ET35 can be set within the range of 20Hz ~ 1MHz
with the stepping of 1mHz and accuracy of 0.01%.
The measurement frequency can be set in the pages of component measurement
and measurement setup.
The steps of setting the measurement frequency
1. Press the [Meas Setup] key
2. Use the arrow key to select "Frequency", and press the [Enter] key
3. Use the numeric input key to input the measurement frequency. When using the
numeric input key to input data, the function key will change to unit (Hz, KHz, MHz). You
can use these function keys to enter the unit. When using the [Enter] key to input
frequency, the unit of frequency default is Hz.
Note: When you enter the digital data with more than five digits (including decimal
digits following the decimal point), it will be automatically set to the nearest measurement
frequency.
The page is shown below
Summary of Contents for ET3501
Page 25: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 22...
Page 77: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 74...
Page 93: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 90...
