East Tester ET3501, Operating Instructions Manual

Page: 55 / 111

ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd. 52
function key to clear the limits. Follow steps 5 to 8 if the tolerance mode is selected; follow
steps 9 to 13 if the sequential mode is selected.
5. Enter the lower limit with numeric input keys into level 1 "lower limit". After the data
are entered, the function key can be used to enter the unit; when using the [Enter] key to
input the limit, the default unit will be same as that of the latest one. After the limit is
entered into level 1 "lower limit", the lower limit of level 1 is automatically set to - (absolute
limit), the upper limit of level one is automatically set to + (absolute limit).
6. The cursor automatically jumps to level 2 "lower limit". Repeat step 5 until the limit
of level 8 is entered. Then the cursor will automatically jump to the 2nd "lower limit".
7. After the lower limit of the auxiliary parameter is entered, the cursor will
automatically jump to the 2nd “upper limit”.
8. Enter the upper limit of the auxiliary parameter.
9. Enter the lower limit of level one with numeric input keys into the level 1 “lower
limit”. After the data are entered, the function key can be used to enter the unit; when
using the [Enter] key to input the limit, the default unit will be same as that of the latest limit
input.
10. After the lower limit of level 1 is entered, the cursor automatically jumps to level 1
“upper limit”. Enter the upper limit of level 1.
11. The cursor automatically jumps to level 2 “upper limit”. Because it is the sequence
mode, the lower limit of level 2 is equal to the upper limit of level 1. Enter the upper limit of
level 2.
12. Repeat step 11 until the upper limit of level 8 is entered. Then the cursor will
automatically jump to the 2nd "lower limit". Enter the lower limit of the auxiliary parameter.
13. The cursor will automatically jump to 2nd “upper limit”. Enter the upper limit of the
auxiliary parameter.