ET35 Series Digital Bridges（LCR）Operating Instructions
Hangzhou Zhongchuang Electron Co., Ltd.
24
1. Press the [Meas Setup] key.
2. Use the arrow key to select "constant level", and press the [Enter] key.
3. Press the [On] function key to open the automatic level control function.
4. Press [OFF] function key to turn off automatic level control function.
The page is shown below
3.1.9 Delay time
ET35 trigger delay means a delay from the time the instrument is triggered to the start
of measurement. The trigger delay time can be set with the delay function. When the List
sweep function is used, the set delay time at each sweep measurement point will be
delayed. The setting range of the trigger delay time: 0s ~ 10s, with 1ms of stepping. When
the instrument is used in automatic test system, trigger time delay function is very useful.
When the instrument is triggered by the HANDLER interface, trigger delay time can
ensure reliable contact of DUT with the test terminal.
The steps of setting the delay function:
1. Press the [Meas Setup] key.
2. Use the arrow key to select "Delay" and press the [Enter] key.
3. Use the numeric keys to enter the delay time, the function key will change to the
unit (ms and s), you can use the function keys to enter the unit, when you press the [Enter]
key to enter the delay time, the default unit is ms.
Summary of Contents for ET3501
Page 25: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 22...
Page 77: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 74...
Page 93: ...ET35 Series Digital Bridges LCR Operating Instructions Hangzhou Zhongchuang Electron Co Ltd 90...
