![background image](http://html1.mh-extra.com/html/east-tester/et3325/et3325_user-manual_3447938007.webp)
6
4. Press
, waveform display area will turn to pulse signal and show Pulse in the status
area. Pulse waves of different parameter values are accessible through the setup of frequency/cycle,
amplitude/high-level, offset/low-level, symmetry and rising/trailing edge.
5. Press
, waveform display area will turn to noise signal and show Noise in the status
area. Noise waves of different parameter values are accessible through the setup of amplitude/high
level and offset/low level.
6. Press
, waveform display area will turn to arbitrary signal and show Arb in the status
area. Arbitrary waves of different parameter values are accessible through the setup of
frequency/cycle, amplitude/high-level, offset/low-level and phase.
7. Press
to switch channels. The selected channel is for parameter setup.
Background color of liquid crystal changes in compliance with the switch of channels.