![background image](http://html1.mh-extra.com/html/east-tester/et3325/et3325_user-manual_3447938010.webp)
9
1.7 Introduction to Functions of Frequency Meter/System
Setup/Help
As shown in Figure 1-8, ET3340 keys are below keys of modulation/frequency sweep/burst on
the front panel to set frequency meter, system setup and help respectively. The following
specifications will offer you guidance on the setup of these functions.
Figure 1-8 Keys of Frequency Meter/System Setup/Help
1. Press
to check the current measured value of the frequency meter.
2. Press
to set output parameters of Channel 1 and 2, buzzer switch, language switch,
file storage, interface information and system information; execute instrument calibration and
system update.
3. Press
to check assistance information list.
2. Advanced Operation Instructions
You have acquired preliminary knowledge on the functions of keys and knobs of all functional
areas on the front panel of ET3340 and are able to make basic operation on function/arbitrary
waveform generator through previous introduction.
This section is introduction to basic waveform setup, arbitrary waveform setup, modulating
waveform setup, frequency sweep waveform setup, burst waveform output, and use of frequency
meter, system function setup and assistance in use.