44
2.7 Assist System Function Setup
Press
to set the channel output parameters, system configuration information, file
storage, check interface information, perform machine calibration and system upgrades,
and inspect system information.
Figure 2-32 Assist System Function Setup Interface
Channel output parameters include load/impedance setup of Channel 1 and Channel 2
System setup provides buzzer switch, Chinese-English switch and screen brightness;
File storage can store and read the state files inside the function signal generator, and also
support the creating and deleting operations to the state and data files on the USB storage
device;
Interface information provides USB PID and VID information inquiry, and RS232 interface
information inquiries;
Calibration provides the amplitude and offset calibration of the machine itself;
System upgrades include front panel upgrade, communication module upgrade and FPGA
procedure upgrade;
System information can inquire some basic information about the machine.
2.7.1 Channel 1/2 output parameter setup
Output impedances of Channel 1 and Channel 2 are set independently, which can be set as
load/impedance.
