![background image](http://html1.mh-extra.com/html/east-tester/et3325/et3325_user-manual_3447938021.webp)
20
Figure 2-12 Display Interface for Setup of Parameter Values of Noise Waveform
Table 2-5 Noise Waveform menu Description
Functional menu
Setup
Description
Amplitude/high-level
——
Set waveform amplitude or
high-level
Offset/low-level
——
Set
waveform
offset
or
low-level
2.1.6 Set arbitrary wave
Press
and the operation menu of arbitrary wave will be displayed at the bottom of the
screen. Use operation menu of arbitrary wave to set its output waveform parameters.
Major parameter of arbitrary waveform include: frequency/period, amplitude/high-level,
offset/low-level and phase. Different arbitrary waves are obtained by altering these parameters.
Specific interface is shown in Figure 2-13.
Figure 2-13 Display Interface for Setup of Parameter Values of Arbitrary Waveform
Table 2-6 Arb Waveform Menu Description
Functional menu
Setup
Description
Frequency/Period
——
Set waveform frequency/period
Amplitude/High-level
——
Set the waveform amplitude/high-level
Offset/Low-level
——
Set the waveform offset/low-level
Phase
——
Set arbitrary wave initial phase