![background image](http://html1.mh-extra.com/html/east-tester/et3325/et3325_user-manual_3447938046.webp)
45
1. Press
→CH1→Select to enter Channel 1 output impedance setup interface and set the
load value of the Output connector, with specific interface being shown below.
Figure 2-33 Channel 1 Output Parameter Setup
To set the output impedance as 50Ω, press 50Ω; to set high impedance, press High Z.
2. Press
→CH1→Select and enter Channel 2 output impedance setup interface.
2.7.2 System setup
Press
→ System → Select and enter the following interface.
Figure 2-34 System Setup Interface