12
Figure 2-3 Setup Parameter Value of Amplitude
Note:
The maximum amplitude will turn to 5Vpp if frequency is higher than 20MHz under 50
Ω
output.
Set offset voltage
1. Press
→
offset to set parameter value of offset voltage.
The displayed offset voltage is either the power-on default value or the offset previously selected.
Use the current value if the offset is valid for the new waveform when changing parameters.
2. Enter the desired amplitude
Use numeric keypad or knobs to enter the desired parameter value. Select the unit desired by
offset and press the softkey corresponding to the desired unit.
Figure 2-4 Setup Parameter Value of Offset
