![background image](http://html1.mh-extra.com/html/east-tester/et3325/et3325_user-manual_3447938026.webp)
25
Table 2-17 User Arbitrary Waveform Creation Interface
Table 2-10 Arbitrary Waveform Creation Menu Description
Functional menu
Setup
Description
Points
——
Set the points of waveforms needing edit.
Upper limit
——
Set a creating point voltage upper limit.
Lower limit
——
Set a creating point voltage lower limit.
Point edit
——
Start waveform editor
Storage
——
Store the user-defined arbitrary waves edited.
Interpolation
linearity
ON/OFF
Enable or disable linear interpolation between defined points of the
waveforms
Point edit
Define waveforms by specifying voltage value for each waveform point. Select point edit and
enter the interface as shown in Figure 2-18. First, edit the first point. Press Voltage to edit the
voltage value of the current point.
When completing the edition of all the points, press OK to exit the current interface and return
to the previous ET3310.