![background image](http://html1.mh-extra.com/html/east-tester/et3325/et3325_user-manual_3447938041.webp)
40
Cycle number
Set the output cycle number of each N-cycle burst string (1 - 65535). If necessary, the burst
period will increase to adapt the specified number of cycles.
Phase
Define the start and stop points of the burst. The phase can be set from 0 to 360°, with default
of 0°. For arbitrary waveforms, 0° is the first waveform point.
Period
Set time from the start of an N-cycle burst to the start of next burst. If necessary, the burst period
will increase to allow a specified number of cycles of each burst.
Period > single waveform period × the number of burst
Set infinite burst
Press
→ Type→ Infinite and enter the interface as shown in Figure 2-29.
Figure 2-29 Infinite Burst Setup Interface