User’s Manual
52
Highlight the second box beside
Disk
S.M.A.R.T.
, and press the button. Select either
ºC
(Celsius) or
ºF
(Fahrenheit), and press the button.
Highlight the
Actions
tab and the System Event
Actions
setup screen displays.
NOTE:
Alarm-Out
action cannot be set to
System
,
Boot Up
,
Restart
,
Shutdown
and
Panic
Record
events.
Highlight the
Notify
box beside the desired event (
System
,
Boot Up
,
Restart
,
Shutdown
,
Panic
Record
,
Check Recording
,
Check Alarm-In
,
Disk Almost Full
,
Disk Full
,
Disk Bad
,
Disk
Temperature
,
Disk S.M.A.R.T.
or
Disk Config Change
), and press the button. You can
toggle the entire list On and Off by highlighting
Notification
and pressing the button. You
can toggle the individual items On and Off by highlighting that item and pressing the button.
Highlight
OK
and press the button to accept your changes.
NOTE:
notify is the only option available for the
System
event.
NOTE: For the Notify action to work, the DVR should be registered in the RAS (Remote
Administration System).
Event Status
Highlight
Event Status
in the Event menu and press the button. The
Event Status
setup screen
appears.
Figure 58 System Event Actions setup screen.
The DVR can be set to react to system events.
System events can activate the Alarm-Out
connector, sound the DVR’s internal buzzer,
and/or notify a number of different devices.
Highlight the
Alarm-Out
box beside the desired
event (
Check Recording
,
Check Alarm-In
,
Disk Almost Full
,
Disk Full
,
Disk Bad
,
Disk
Temperature
,
Disk S.M.A.R.T.
or
Disk
Config Change
), and press the button.
Select between Alarm Output and Beep (DVR’s
internal buzzer) that you would like to activate
and to sound whenever the DVR detects an
event.
Summary of Contents for E-DVR-104
Page 1: ......
Page 2: ......
Page 62: ...User s Manual 54 ...