Eagle E-DVR-104, User Manual

Page: 57 / 92

4- & 8-Channel Digital Video Recorder
49
NOTE: The following description is for a Generic Text Device . The screen changes for
different types of text input devices, and there will be different parameter boxes for you to
enter information.
Highlight the box beside Transaction Start , and press the button. Use the virtual keyboard
to enter the Transaction Start string. Refer to the device manufacturer’s documentation for the
text string that the device first sends when a transaction starts.
If you want the DVR to react to any character sent from the text input device, you will want to
turn On
Any Character.
Highlight
Any Character
, and press the button to toggle between
On and Off.
NOTE: If Any Character is turned On, you will not be able to enter any text in the Transaction
Start box.
Highlight the box beside
Transaction End
, and press the button. Use the virtual keyboard to
enter the Transaction End string. Refer to the device manufacturer’s documentation for the text
string that the device sends when a transaction ends.
Highlight the
more line(s)
box, and press the button. Select the number of additional lines of
text that you want the DVR to record. You can choose from 0 to 10.
Highlight the box beside Line Delimiter , and press the button. Use the virtual keyboard to enter
the character(s) that the device uses to indicate the end of a line. Special characters can be created
using ^ and a capital letter; e.g., ^J for NL (New Line), ^M for CR (Carriage Return). Refer to
the device manufacturer’s documentation for Line Delimiter character(s).
Highlight the box beside Ignore String , and press the button. Use the virtual keyboard to enter
any strings of text that you want the DVR to ignore. Refer to the device manufacturer’s
documentation for text strings that the device sends during transactions, so you will know which
ones you do not want recorded.
Highlight the Case Sensitive box, and press the button to toggle between On and Off. Refer
to the device manufacturer’s documentation to determine if the text strings are Case Sensitive. If
the device distinguishes between upper and lower case letters, make certain the
Case Sensitive
box is turned On.
Highlight the box beside Time Out , and press the button. Set the length of time to wait for the
new text string. The DVR will consider a transaction complete if no new text strings are entered
between the last text input and the dwell time out. You can adjust the Time Out dwell from 5
seconds to 15 minutes.
Highlight the
Actions
tab, and the Text-In
Actions
setup screen appears.