User’s Manual
14
Special characters can be created using ^ and a capital letter; e.g. ^J for NL (New Line), ^M for
CR (Carriage Return). Special characters are commonly used by text input devices and will be
useful when performing Text-In Searches.
System Setup
Figure 8 System menu.
Information
Highlight
Information
in the System menu and press the button. The
Information
setup screen
appears.
Highlight the box beside
System ID
and press the
button. Change the number by highlighting
it and using the
Up
and
Down
arrow buttons to increase and decrease the number from 0 to 99.
NOTE: The System ID number is used to identify the unit when it is connected with other
DVRs through the RS485 port. You cannot use the same ID number for two or more DVRs
that are in the same RS485 network. It is possible to have multiple DVRs with System ID
0 that are in the same area as long as they are not part of an RS485 network. If this is the
case, all will be controlled at the same time when using the infrared remote control.
Use the arrow keys to highlight the character you want in the name or
title and press the button. That character appears in the title bar and
the cursor moves to the next position. Pressing
toggles between
the upper and lower case keyboards,
backspaces, and deletes
entered characters. You can use up to 31 characters including spaces
in your title.
Figure 9 Information setup screen.
In the
Information
screen, you can name the
site location, assign a System ID number, select
the language the screens are displayed in, display
software version number, upgrade the software,
show the System Log, display recorded time
data, and clear all data.
Highlight the
Site
box and press the button.
A virtual keyboard appears that you can use to
enter a Site Name.
Once you have entered your
title, highlight
Close
and press the button.
Summary of Contents for E-DVR-104
Page 1: ......
Page 2: ......
Page 62: ...User s Manual 54 ...