Eagle Eye PTZ NETWORK CAMERA SERIES, User Manual

Page: 23 / 39

19
Function Description
Recipient Click “Add” to enter the phone number, including the country code, to receive the text
message. Five sets of phone numbers are allowed.
Test SMS To know whether your SMS setting is correct, click this button to immediately send a SMS to
your phone.
Note: This testing is not free and you will be charged for SMS sending base on your
local rate.
4.2.7 Filter
Choose to permit or block the IP address(es) which can access this camera.
Function Description
Error Login Count Set the maximum count for login failure. When the maximum count is reached, the IP address
trying to access the network camera will be locked.
Error Lock Time Set the lock time in minutes when the maximum count of error login for an IP address is reached.
Echo Request Select “Non-Block” to allow other users to use the ping command to detect the IP address of your
network camera, or “Block” to deny the ping command request.
Filter Choose to enable (YES) or disable (NO) the filter function.
If “YES” is selected, choose whether you want to permit (Allow) or block (Deny) the IP address list
below.
‧
To add an item to the IP address list, key in the IP address in “IP Address”, and click “Add”.
‧
To remove an existing item in the IP address list, click the item you want to remove, and click
“Delete”.
Apply Click “Apply” on the bottom right corner when any change is made in this menu, or the change will
not be recorded in the system.
4.2.8 UPnP
“
UPnP” stands for “Universal Plug and Play”, which allows devices to connect seamlessly in
the home and corporate environments and simplify installation of computer components.
Check “Enable UPnP” to allow the network camera to be detected among devices within the
same network area, and set the identification name of the camera in “Friendly name”.
When this function is activated, the other PC within the same domain as this camera will be
able to search this camera in “Network Neighbor” with the identification name set in “Friendly
name”. Double-click it to quickly open the web browser for camera access.