Product Manual RCUXXYY
EAE KNX Room Control Unit
RCUXXYY PM R1.0
©
EAE Technology
www.eaetechnology.com
Page 26 / 80
Dim BRIGHTER/DARKER
With the long push button action, the light becomes brighter or darker depending on the object
value and the last controlled dimming direction.
A long operation changes the value of the object
“
Dimming
”
.
Long operation after
*0,3s
…10s
This parameter is visible if the parameter value is set “Dimming and switching”. Long press
period is
select here.
Dimming mode
*start-Stop dim
dimming steps
▪
“Start
-
Stop dim”: It starts the dimming process with a telegram BRIGHTER
or DARKER. In
addition, button releases than STOP-dimming telegram sends. Cyclic sending telegram is not
necessary in this case.
▪
“Dimming steps”: The dimming telegram is sent cyclically during a long operation. STOP
telegram sends at the end of operation.
Brightness change on every sent telegram
%100…
*%6,25
…%1,56
This parameter is only visible with the “Dimming steps” options. This parameter is cyclically sent with
every dim telegram.
Transmission cycle time:
Telegram is repeated every
0,3s
…
*0,5s
…10s
Th
is parameter is only visible with the “Dimming steps” options. The cycle time for sending
corresponds with the time interval between two telegrams during cyclical sending.
Debounce time
10ms…
*50ms
…150ms
Debounce uses the input, which means checking twice in a short period to make sure it is definitely
pressed.
4.2.3
a - Blind Sensor
