Product Manual RCUXXYY
EAE KNX Room Control Unit
RCUXXYY PM R1.0
©
EAE Technology
www.eaetechnology.com
Page 23 / 80
Short/Long Press:
Distinguishing short from long presses is about measuring the pulse length. The
event is no longer emitted upon pressing the button, but upon releasing it. This can affect the feeling
of responsiveness.
The picture of this step shows a long press and short press timing, with a long press threshold of Tl
periods. The button press longer than Td period but shorter than Tl period this mean is short pressed
occurs.
Distinction between long and short
operation
yes
*no
If the parameter is set no, the input will be evaluated normally on every edge of the input signal. Yes
is selected. There is a delay after opening/closing the contact to determine whether there is a short
or long operation.
Connected contact type
normally closed
*normally open
This parameter is visible if there is distinction between short and long operation. The contact type of
the push button attached to the channel is adjusted here.
Cyclic transmission of object
*no
”switch” = OFF
”switch” = ON
always
This parameter is visible if there is no distinction between short and long actuation. This parameter
determines if and when a switching value is sent cyclically via the corresponding communication
object.
Reaction on closing the contact
(rising edge)
*ON
OFF
TOGGLE
no reaction
This parameter is visible if there is no distinction between short and long actuation. This parameter
determines the switching value to be sent when the contact is closed.
Reaction on opening the contact
(falling edge)
ON
*OFF
TOGGLE
no reaction
This parameter is visible if there is no distinction between short and long operation. This parameter
determines the switching value to be sent when the contact is open.
