Product Manual RCUXXYY
EAE KNX Room Control Unit
RCUXXYY PM R1.0
©
EAE Technology
www.eaetechnology.com
Page 17 / 80
Activate scene
*
no
yes
If parameter is selected “yes”, “Scenes” section will be visible in parameter titles.
Weather alarm function
enable
*
disable
If the parameter is selected
“yes”
,
“
Weather Alarm
”
section will be visible in parameter titles. You
can find weather alarm information under the
“Weather Alarm”
section.
3.2
Weather alarms
Order of priority for weather alarms
*1.Wind 2.Rain 3.Frost
1.Wind 2.Frost 3.Rain
1.Rain 2.Wind 3.Frost
1.Rain 2.Frost 3.Wind
1.Frost 2.Wind 3.Rain
1.Frost 2.Rain 3.Wind
If an alarm is triggered, the drives move into a safe position and stay in safe position until the event is
over. You can select the priority of the weather alarm. This parameter is applied for all blind/shutter
channels which are enabled for weather protection function. If more than one weather alarms occur
simultaneously, then only the alarm with highest priority will be activated. The other lower priority
alarms are carried out after highest priority alarm is completed.
Wind alarm
*disable
enable
This parameter activates the wind alarm. If the parameter selected
“
enable
”
,
“
Monitoring period for
wind alarm in s [0…1000]”
parameter will be visible.
