e-Line Technology SIBELL QDVR-SBE32, User Manual

Page: 133 / 150

Remote Surveillance DVR User Manual
126
you get from your ISP. Click “Apply” to save the settings.
② Click Start

Settings

Network

Network Status to view the IP address of the
DVR.
③ Open IE browser on a computer, input the IP address of the DVR like
http://210.21.229.138 in the IE address bar and then press enter to go to the login
interface. Input the username and password of the DVR in the interface and then
click “Login” to go to the live preview interface.

Router Access
① Click Start

Settings

Network

TCP/IPv4 to go to the “TCP/IPv4” interface. Set
the IP address, subnet mask, gateway, preferred DNS and alternate DNS of the DVR.
② Set the HTTP port (it is suggested to modify the HTTP port because the default
HTTP port 80 might be taken up) and enable UPnP function in both the DVR and the
router. If the UPnP function is not available in the router, you need to forward the
LAN IP address, HTTP port and server port of the DVR to the router. Port mapping
settings may be different in different routers, so please refer to the user manual of
the router for details.
③
Get the WAN IP address of the DVR from the router. Open IE browser on a
computer, input the WAN IP address plus HTTP port like http://116.30.18.215:100
in the IE address bar and then press enter to go to the login interface. Input the
username and password of the DVR in the interface and then click “Login” to go to
the live preview interface.
Note: If the WAN IP address is a dynamic IP address, it is necessary for you to use the domain name to
access the DVR. Click Start

Settings

Network

DDNS to set DDNS (see
11.1.3 DDNS Configuration
for details). By using DDNS function you can use the domain name plus HTTP port like
http://sunshine.dvrdydns.com:100 to access the DVR via internet.