e-Line Technology SIBELL QDVR-SBE32, User Manual

Page: 70 / 150

PTZ DVR User Manual
63
information of the dome and then click to add cruise. The operations of the
“Add Cruise” window are similar to that of the PTZ control interface; please see
6.1
PTZ Control Interface Introduction
for details.

Edit Cruise
Select the camera and cruise in the “Cruise” interface. Input the new cruise name
and then click to save the cruise name. Click “Add Preset” to add preset to the
cruise. Click to delete the preset from the cruise. Click one preset in the preset
list and then click to move down the preset and click to move up the
preset. Click to start the cruise and click to stop it.

Delete Cruise
Click in the camera list on the right side of the interface to display the cruise
information of the dome and then click on the top right corner of the cruise to
delete the cruise.
PTZ Protocol Setting
Click Start

Settings

Camera

PTZ

Protocol to go to the interface as shown
below. You can set the protocol, baud rate and address of the analog dome in the
interface. Please make sure the analog speed dome camera is well connected to the
DVR before you control it.