e-Line Technology SIBELL QDVR-SBE32, User Manual

Page: 122 / 150

Device Management DVR User Manual
115
Click “Add” and then input the recipient’s e-mail address in the popup window. Click “Add” in
the window to add the recipient. Click to delete the recipient in the list. Click “Apply” to
save the settings. Click “Edit Sender” to go to the e-mail configuration interface of the sender.
UPnP Configuration
By UPnP, you can access the DVR through IE client which is in WAN via router
without port mapping.
① Click Start

Settings

Network

UPnP to go to the following interface.
② Make sure the router supports UPnP function and the UPnP is enabled in the
router.
③
Set the DVR’s IP address, subnet mask and gateway and so on corresponding to
the router.
④
Check “Enable” in the interface as shown below and then click “Apply” button.