e-Line Technology SIBELL QDVR-SBE32 User Manual Download

Page: 64 / 150

PTZ

DVR User Manual



Advanced 3D Control

Double click the left button of the mouse on any area of the camera image and then

the image size will be doubled and centered on the clicked point.

Press and hold the left button of the mouse on any area of the camera image to

zoom in the image; press and hold the right button to zoom out the image.

Move the cursor of the mouse to the camera image and then slide the scroll wheel

of the mouse forward to zoom in the image, slide the scroll wheel of the mouse

backward to zoom out the image.



OSD Setting

Go to PTZ protocol setting interface and then set the protocol to COC before you

call the OSD. Click “OSD” to go to camera OSD setting interface. Click

to start

OSD setting. The meanings of the buttons are shown in the table below.

Summary of Contents for SIBELL QDVR-SBE32























































































































































Search results

Summary of Contents for SIBELL QDVR-SBE32

Reviews:

Related manuals for SIBELL QDVR-SBE32

Brands by name

Popular brands

e-Line Technology SIBELL QDVR-SBE32, User Manual

Search results

Summary of Contents for SIBELL QDVR-SBE32

Reviews:

Related manuals for SIBELL QDVR-SBE32

Brands by name

Popular brands