e-Line Technology SIBELL QDVR-SBE32, User Manual

Page: 82 / 150

Record & Disk Management DVR User Manual
75
The camera will start motion based recording once you finish the above settings.
Sensor Based Recording
①
Set the sensor based recording schedule of each camera. See
7.3 Schedule Setting
for details.
② Set the NO/NC type of the sensor, enable the sensor alarm and then check and
configure the “Record”. See
9.1 Sensor Alarm
for details.
Disk Management
Click Start

Settings

Disk

Disk Management to go to disk management
interface. You can view the DVR’s disk number and disk status and so on in the
interface. Click “Formatting” button to format the HDD.
Note: 1. The new HDD should be formatted for normal use.
2. For normal use of the HDD which has been used in other DVR, if the DVR is of the same model
with the new DVR, please import the configuration file of the DVR to the new DVR or format the
HDD; if the models of the two DVRs are different, please format the HDD.