e-Line Technology SIBELL QDVR-SBE32, User Manual

Page: 117 / 150

Device Management DVR User Manual
110
DDNS Configuration
The DDNS is used to control the dynamic IP address through domain name. You can
access to the DVR easily if the DDNS is enabled and configured.
Click Start

Settings

Network

DDNS to go to the interface as shown below.
Check “Enable” and then select the DDNS type. Input the server address, domain
name, username and password according to the selected DDNS type. Click “Test” to
test the effectiveness of the input information. Click “Apply” to save the settings.
You will have to input the server address and domain name if some DDNS types are
selected. Go to the relative DNS website to register domain name and then input
the registered domain information here). Now we take www.dvrdydns.com for
example.
①
Input www.dvrdydns.com in the IE address bar to visit its DNS website.