E-Bike CITY BIKE Original Operating Manual Download Page 98

Page: 98 / 112

Servicing and maintaining the bike

Maintenance intervals

Interval

Components

Activity

After each long or
hard use or at least
150 km

Bike, chains



Clean the bike and lightly
lubricate the chain. Wipe off
any excess oil with a cloth.
Dispose of the cloth in an
environmentally friendly
manner.



Use commercially available
cleaner and lubricant.



Observe the information on
safe use of these products
as well as environmental
regulations for the individual
substances.

After each long or
hard use or after
every 10 to 20 hours
of riding

Complete bike



Check the bike for damage.



Have the bike repaired by a
qualified specialist dealer if
necessary.

Every 25 (hard use)
to 50 (on-road)
hours of riding

Complete bike



Check the bike for damage.



Have the bike repaired by a
qualified specialist dealer if
necessary.

Summary of Contents for CITY BIKE

















































































































Search results

Summary of Contents for CITY BIKE

Reviews:

Related manuals for CITY BIKE

Brands by name

Popular brands

E-Bike CITY BIKE, Original Operating Manual

Search results

Summary of Contents for CITY BIKE

Reviews:

Related manuals for CITY BIKE

Brands by name

Popular brands