E-Bike CITY BIKE, Original Operating Manual

Page: 75 / 112

Controlling the auxiliary drive
73
Switch on or off
To switch the control unit on, proceed as follows:

Press MODE until the display turns on.
To switch the control unit off, proceed as follows:

Press MODE until the display goes off.
Making settings
To make settings, proceed as follows:

Press MODE until the display turns on.

Press UP and DOWN for about three seconds at the same time.
Settings mode will be displayed.
You can make the following settings here.

time

maximum speed

tyre diameter

backlight.
Setting the time
To set the time, proceed as follows:

Set the hours with UP and DOWN.

Press MODE

Set the minutes with UP and DOWN.

Press MODE to confirm the settings.

To exit settings mode and apply the settings, press MODE for
about two seconds.
Setting the maximum speed
When the maximum speed to be set here is reached, the auxiliary
drive switches off automatically. When setting the maximum speed,
observe and follow the traffic and legal regulations.
To set the maximum speed, proceed as follows:

Use UP and DOWN to select km/h or mph.

Press MODE