Before the first ride
50
Adjusting the Saddle
The correct setting of the saddle is important for safe riding.
You can make the following adjustments to the saddle:
height
distance from the handlebars
t
ilt of the saddle.
To check whether the saddle height is set correctly, proceed as follows:
Sit on the saddle.
In the process, hold onto a railing, for example.
Move the pedal to the bottom position.
Place your heel on the pedal.
The setting of the height is correct when your heel is on the pedal in the
bottom position, and your leg is almost fully extended.
If your leg is not completely extended, then the saddle has to be set
higher.
If you need to move your hips to reach the pedal, then the saddle has to
be set lower.
To set the saddle height, proceed as follows:
Loosen the saddle clamp with the appropriate tool.
If there is a quick-release fastener, open it.
You can now move the saddle up and down and adjust the height.
Make the desired setting.
WARNING
Falling from the bicycle possible from the seat post
breaking
Serious injuries may be the consequence.
Make sure that the marking on the seat post
showing the minimum insertion depth is in the
seat tube and not visible.
Summary of Contents for CITY BIKE
