E-Bike CITY BIKE, Original Operating Manual

Page: 45 / 112

Install the components of the bike
43
To check if the front wheel is aligned correctly, proceed as follows:

Spin the wheel
The rim or the tire must not rub on the brakes or the frame.

If this is not the case, possibly ask a dealer for advice.
Proceed as follows to install the front wheel with a quick-release
fastener:

Open the quick-release lever on the front wheel by folding it open,
and turn the adjusting nut a few turns counter-clockwise.

Put the bike upside-down. To do this, the handlebars and saddle
must be installed.

If there are disc brakes, make sure that the brake disc is inserted in
the brake calliper.
For other brake systems, you might have to open the brake so that the
front wheel can be installed.

Insert the front wheel into the recesses of the fork as far as it will go.
The springs of the quick-release fastener must each be located on the
outside of the fork.

Hold the quick-release lever firmly, and tighten the adjusting nut
clockwise.

Fold down the quick-release lever as far as it goes.
If you opened the brakes, then they must be closed again.
To check if the front wheel is aligned correctly, proceed as follows:

Spin the wheel
The rim or the tire must not rub on the brakes or the frame.

If this is not the case, have the front wheel aligned by a dealer.