E-Bike CITY BIKE, Original Operating Manual

Page: 76 / 112

Controlling the auxiliary drive
74

Set the desired maximum speed with UP and DOWN.

Press MODE to confirm the settings.

To exit settings mode and apply the settings, press MODE for
about two seconds.
Setting the tyre diameter
To set the tyre diameter, proceed as follows:
The
default is 26 inches.

Set the existing tyre diameter with UP and DOWN.

Press MODE to confirm the settings.

To exit settings mode
and apply the settings, press MODE for about
two seconds.
Setting the backlight of the display
To set the backlight of the display, proceed as follows:
By default, level 1 of 3 levels is set. Level 1 is the weakest backlight.

Set the desired level of backlight with UP and DOWN.

Press MODE to confirm the settings.
You can now exit settings
mode.

To exit settings mode and apply the settings, press MODE for
about two seconds.
After you have made all the settings, turn the control unit off
and on again once. The control unit will then accept the
settings that were made.
Selecting the assist level
The assistance by the auxiliary drive only works if you provide
part of the required pedal force yourself.