background image

Safety

 

 

Never make changes to the control unit and electric motor. 

Body size of the rider 

Min. 160 cm, max. 180 cm 

Personal qualifications 

This manual is intended for instructed riders. 

The following knowledge and experience are required for the rider: 

 

instructed by the retailer on how to use the bike 

 

knows that improper use of the bike can cause accidents 

 

can use the bike in accordance with this manual. 

Personal protective equipment 

Serious injuries or death are possible when riding bikes. 

 

Always wear an approved helmet when riding, and follow the 
manufacturer’s information from the related manual in connection 
with the adjustment, usage and care of the helmet. 

 

Always wear sturdy shoes with a non-slip sole (e.g. rubber sole with 
treads). 

 

It is preferable to always wear gloves. 

 

Always wear tight-fitting clothing to prevent it getting caught in the 
bicycle or on objects on the side of the road or path. 

 

Always wear glasses (clear) that protect against dirt, dust and 
insects. 

 

Always wear tinted glasses in sunshine. 

Summary of Contents for CITY BIKE

















































































































Reviews: