E-Bike CITY BIKE, Original Operating Manual

Page: 54 / 112

Before the first ride
52
Ahead stem
With this type of stem, you can adjust the alignment of the stem and the
angle of the handlebars. The height of the handlebars cannot be set. If
you need to change the height, ask your specialist dealer.
ATTENTION!
Possible for fork to fall out and cause parts to be
lost.

Make sure that the front wheel or alternatively
the fork is on the ground before loosening the
screw on the cap.
To set the alignment of the handlebars proceed as follows:

Make sure that the front wheel or alternatively the fork is on the
ground.

Loosen the screw of the cap (1) minimally.

Loosen the screws (2) that secure the stem by about one revolution.
Now you can align the stem including handlebars.

Turn the stem including the handlebars to the desired position.

Tighten the screw of the cover with max. 3-5 Nm.

Tighten the screws (2) to secure the stem.